Penerapan Model-Based Design untuk Kendali Elektronika Daya: Studi Kasus STM32 dan Simulink
DOI:
https://doi.org/10.46962/snte.25.062Keywords:
Model-Based Design,, Inverter, Model in Loop, Software in Loop, Hardware in LoopAbstract
Penelitian ini membahas penerapan Model-Based Design (MBD) untuk sistem kendali elektronika daya, dengan fokus pada pengendalian inverter berbasis Sinusoidal Pulse Width Modulation (SPWM) menggunakan MATLAB Simulink dan mikrokontroler STM32. Metodologi yang digunakan mengikuti kerangka V-Model, meliputi tahapan perancangan konsep, pemodelan, verifikasi Software-in--Loop (SIL), dan validasi Hardware-in-Loop (HIL). Studi kasus yang digunakan adalah inverter H-bridge satu fasa dengan kendali SPWM. Hasil penelitian menunjukkan keberhasilan implementasi MBD dalam merancang dan menguji sistem kendali inverter, dengan kesesuaian antara hasil simulasi dan pengujian hardware. Pendekatan ini terbukti efektif dalam mempercepat proses pengembangan, meningkatkan keandalan sistem, dan memfasilitasi iterasi desain yang cepat. Studi ini diharapkan dapat menjadi referensi aplikatif bagi pengembangan sistem kendali daya yang efisien dan mudah direplikasi, baik dalam lingkungan pendidikan maupun industri.
References
B. K. Bose, “Power Electronics, Smart Grid, and Renewable Energy Systems,” Proceedings of the IEEE, vol. 105, no. 11, pp. 2011–2018, Nov. 2017, doi: 10.1109/JPROC.2017.2745621.
F. A. Silva and M. P. Kazmierkowski, “Power Electronics and Motor Drives: Advances and Trends, Second Edition [Book News],” IEEE Industrial Electronics Magazine, vol. 15, no. 2, pp. 89–90, Jun. 2021, doi: 10.1109/MIE.2021.3071209.
J. Falck, C. Felgemacher, A. Rojko, M. Liserre, and P. Zacharias, “Reliability of Power Electronic Systems: An Industry Perspective,” IEEE Industrial Electronics Magazine, vol. 12, no. 2, pp. 24–35, Jun. 2018, doi: 10.1109/MIE.2018.2825481.
A. H. Al-Omari and S. Al-Zubaidi, “Investigating low order harmonics of sinusoidal pulse width modulation with voltage closed loop control,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 26, no. 3, p. 1258, Jun. 2022, doi: 10.11591/ijeecs.v26.i3.pp1258-1265.
R. S. Lubis, A. Haris, and T. Tarmizi, “UPS Design for Increased Flexibility of Use and More Economic with PWM Controlled Inverter Based on ATmega 328 Microcontroller,” TEKNIK, vol. 43, no. 1, pp. 102–111, May 2022, doi: 10.14710/teknik.v43i1.32736.
S. YARIKKAYA and K. VARDAR, “Stm32f4 Ve Matlab Kullanılarak Tek Faz Şebeke Bağlantılı Pv İnverterin Hızlı Prototip Geliştirilmesi,” European Journal of Science and Technology, pp. 213–223, Apr. 2020, doi: 10.31590/ejosat.680586.
M. R. Rusli et al., “BLDC Motor Drives with A Programmable Simplified C-Block to Generate Accurate Six-Step PWM Based on STM32 Microcontroller,” Elinvo (Electronics, Informatics, and Vocational Education), vol. 7, no. 2, pp. 112–118, Jan. 2023, doi: 10.21831/elinvo.v7i2.52992.
D. Sankar, L. Syamala, B. Chembathu Ayyappan, and M. Kallarackal, “FPGA-Based Cost-Effective and Resource Optimized Solution of Predictive Direct Current Control for Power Converters,” Energies (Basel), vol. 14, no. 22, p. 7669, Nov. 2021, doi: 10.3390/en14227669.
W.-J. Li, D.-S. Li, and J.-W. Zhang, “Model-Based Design and Experimental Validation of Control System for a Three-Level Inverter,” Electronics (Basel), vol. 11, no. 13, p. 1979, Jun. 2022, doi: 10.3390/electronics11131979.
A. Bucaioni, F. Ciccozzi, A. Di Salle, and M. Sjödin, “From low-level programming to full-fledged industrial model-based development: the story of the Rubus Component Model,” Softw Syst Model, vol. 22, no. 4, pp. 1085–1097, Aug. 2023, doi: 10.1007/s10270-023-01107-3.
R. Wang et al., “A Formal Model-Based Design Method for Robotic Systems,” IEEE Syst J, vol. 13, no. 1, pp. 1096–1107, Mar. 2019, doi: 10.1109/JSYST.2018.2867285.
T. Jongsataporn and S. Chivapreecha, “Embedded hardware implementation of noise gate on STM32 processor using MATLAB/Simulink,” in 2024 International Conference on Photonics Solutions (ICPS2024), A. Bhatranand, Ed., SPIE, Feb. 2025, p. 18. doi: 10.1117/12.3058631.
M. Vignati, N. Debattisti, M. L. Bacci, and D. Tarsitano, “A software-in-the-loop simulation of vehicle control unit algorithms for a driverless railway vehicle,” Applied Sciences (Switzerland), vol. 11, no. 15, Aug. 2021, doi: 10.3390/app11156730.
C. Hisar, I. Sefa, and N. Altin, “Processor-in-the-Loop Simulation of an Interleaved Buck Converter With MATLAB/Simulink,” in 2021 13th International Conference on Electronics, Computers and Artificial Intelligence (ECAI), IEEE, Jul. 2021, pp. 1–6. doi: 10.1109/ECAI52376.2021.9515058.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Seminar Nasional Teknik Elektro
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
